RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

Titan Reloading wishes all of you a Very Merry Christmas and a Happy New Year. May you find in this season the Peace that you remember from years gone by, to preserve it forever.

The Titan Crew hopes you all had a Great Thanksgiving. Our family get together has been complete ever since our son came home from the Marine Corps. Our prayers always include those not able to be home due to service of our country and also for all the families with an empty chair during the Holidays. We owe them a debt we can never repay, THANK YOU.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

Hornady Lock-N-Load Classic Kit

In addition to everything you receive in the Classic Kit (above), the Deluxe Classic Kit includes shell holders in the most popular sizes, bushings and Sure-Loc rings, as well as some other handy tools.

Precision and ease make the Classic Press a winner.

A single stage press is perfect for both beginners and those who want complete control over the entire process. The Lock-N-Load Classic delivers both dependability and precision with its uniquely angled, solid cast frame that offers greater visibility and easier access to the cartridge. Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy.

Press Features

  Lock-N-Load Quick Change Bushing System

Lock-N-Load bushings not only let you switch from one die to another in a matter of seconds, they also offer the quickest and easiest die setup on the market. Just set the die and tighten the Sure-Loc ring on to the Lock-N-Load bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.

  Power-Pac Linkage and Solid Steel Arms

Arms rotate on steel pins that run completely through the cast frame. The Power-Pac linkage design multiplies the leverage you apply to the handle, making it easier to size cases and reduces user fatigue.

  Positive Priming System (PPS)

Once the spent primer ejects at the top of the stroke, you can add a new primer to the PPS and it self-aligns to feed and insert the primer at the bottom of the stroke where leverage is best. Our self-aligning primer arm also allows for easy manual inserting of primers without having to raise the handle. All the work is done at the bottom of the stroke. Works easier than ram prime units and much better than old style primer arms. Small and large punch included.

  Strong Angled Frame

This high strength alloy frame offers the rigidity and stability needed for precision reloading, and is guaranteed never to break or fail. The frame’s unique angle gives the reloader greater visibility and easier access to the cartridge in the press.

  Easy Grip Handle

Large, ball-style grip reduces fatigue. The long handle increases leverage and reduces effort.

INSIGHT OF THE MONTH:

Tight Case Length Gage in Resized Case

Rifle cases that have been resized, and deprimed, have had the neck reduced in diameter by forcing it into the die, and then by pulling the case out of the die the expander has opened the case mouth to a size usually .001” smaller than your bullet diameter.

With Pistol cartridges case neck wall thickness makes the difference. Sizing the case from the outside squeezes the case down. If the case wall is .002” thicker than nominal, that makes the inside diameter of the case mouth .004” smaller, making the gauge tight.

The gauge should be that same .001”- .002” smaller than the neck diameter. If it fits tight in your cases, you can simply reduce your gauge diameter.

Remove the gauge from the cutter. Clamp the gauge in a drill chuck and spin it. Take some 320 grit emery cloth and sand down the large end until it fits into your case. This is only a thousandth of an inch or two, so it does not take much to remove it.

If you are having trouble getting the gauge into the cutter, take a hand drill and lock the gauge into the chuck. This is just to give you something to hold it with. Now screw the cutter on. They are made tight so they won’t work loose.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post December 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

Well, Fall is officially here. The kids are back in school, the days are getting shorter and yes, the leaves are beginning to change colors. This can only mean one thing to many of us, hunting season is right around the corner. There is nothing like the sights and smells of the woods this time of year and the anticipation of our favorite game stepping out of the brush. The Titan Crew wishes all of you the best of luck this year.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

ACME’s Hi-Tek “Lipstick” Bullets

With the introduction of their Hi-Tek coated bullets, the ACME Bullet Company has raised the bar on reloading and shooting. Commonly referred to as lipstick bullets because of the red coating in which they are encapsulated, the benefits of ACME s coated rounds are unmatched.

What Is ACME Hi-Tek Coating?

The Hi-Tek coating used by ACME is a specially designed substance that forms a molecular bond with the bullet, or, more simply, the coating and bullet become one. This bond prevents the Hi-Tek coating from peeling or chipping, even under the most extreme of conditions. ACME uses a 92-6-2 alloy for its bullet casts, which, in this case, means that 92% of the round is lead, and the remainder is tin and antimony.

What Are the Benefits of Using ACME Hi-Tek Coated Bullets?

Several outstanding benefits make ACME s coated bullets a top choice for reloaders and shooters alike, including:

The post October 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

SEPTEMBER 5th

WOW! Summer’s all but gone already. The kids around here start school today and the days have definitely gotten shorter. If you’re like me it’s all good because hunting is just around the corner but I sure hate to see summer go. 

The Tiatn Crew and I would like to THANK all of you, our loyal customers. A couple weeks ago on August 19th, Titan Reloading celebrated twelve years in business. September 1st, will mark the six year anniversary of our showroom’s opening in Hartford Wisconsin. We appreciate your supporting our business and we will continue to live up to the many kind recommendations you have shared with your friends.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

Lee Reloading Stand

Introducing the Lee Reloading Stand, perfect for the reloader with limited working space, an overwhelmed workbench, or someone looking for solution to portable reloading needs. The sturdy powder coated steel stand places your press at the perfect counter stool or standing height of 39″. The 10 inch triangular steel top plate uses the Patented quick change Lee Bench Plate system. The stand is 26″ wide by 24″ deep so it does not require a lot of room.

There?s more, the reloading stand includes a sturdy steel shelf with two bench plate receivers that will neatly and securely store your extra presses or mountable accessories. Included with the stand is one storage bin for component or tool storage, which clips onto the steel bin bracket provided with the stand. Each leg has eight mounting holes that allow you to accessorize your stand with a multitude of bins, shelves or accessory die racks. Includes drawing to customize and make your own extended work surface. This reloading stand is perfect for the apartment-dweller or anyone who is limited on space.

: Fits all Lee metallic presses (Fasteners for mounting one press are included).

: Powder-Coated Steel

: Comes with 1 storage bin and bracket, the top plate, the bottom shelf, 1 drilled Steel Base Block and the complete fastener set for top plate and bottom shelf along with two steel concrete block hangers.

NOTE: The press and concrete block shown in the picture are not included. Concrete block is necessary for safe, stable operation. Obtain one at any building supply or home center.

INSIGHT OF THE MONTH:

Important Reloading Safety Procedures

One of the most basic understandings about reloading is that using the wrong cartridge and primer can result in injury to yourself and possibly people around you. Incorrectly loaded ammo can also be unreliable during an emergency.

A first step in safety is understanding the equipment and reloading supplies that you are working with. We offer an entire video library to help you reload safely and get the most from the experience. With an understanding of the equipment, you ll be ready to begin the hands-on process by following these basic safety rules.

Safety Glasses and Gear

As you wear safety glasses at the gun range, you also need to wear them when reloading. Probably the most obvious reason is in case of an accidental primer explosion. If you wear prescription or reading glasses, there are safety glasses (with side shields) that fit over your regular glasses. In addition to the risk of a primer explosion, other operations such as pressures applied by presses can eject metal shavings and powder as shrapnel. Safety glasses should be a requirement for everyone in the room while you are reloading. Gloves should be worn as protection from sharp tools, pinch points, and chemicals found in reloading supplies. It s also a good practice to wear a protective apron.

Clean and Organized Reloading Space

You only want the equipment and reloading supplies on your workbench that you need for the tasks at hand. Make sure that your workspace is clean and spacious before the next session, not only for safety purposes, but for efficiency and time. Furthermore, it is in your best interest to properly label containers to avoid accidentally mixing materials.

• Clean up any spills immediately.
• Allow only one canister of powder and primer type on the bench at a time.
• Powder and primers should be kept in their original containers. Clearly label these if using another container and discard anything you can t identify.

Pay Attention to Details

Give reloading your complete, undivided attention, and make time to do it right. Clear the area of TV, phone, and visitors. Have your manuals and handbooks for every bullet you are reloading never guess. Reloading is a precision process that requires you to follow instructions including load data and equipment setup instructions. Of course, no alcohol or drugs.

Keep Primers and Powder Away from Heat Sources

Think about any possible source of ignition. Any heat source can set off primers and powder including electrical sparks from power tools, open flames, and smoking. One of the wisest safety steps you can take is storing powder and primers away from all other equipment and reloading supplies (preferably in a different room and in fire-resistant containers like an ammo can). Don t store primers in bulk because a few hundred primers going off at the same time can be the same as a hand grenade. Handle loaded primer tubes with care a dropped tube can explode(primers should not be stored in tubes). Additionally, primers and powder should be stored away from extreme heat, cold, and humidity that can affect how they function.

Reloading Scale

Again, reloading requires precision from which a safe and accurate powder scale is required. Never use a food scale, postage scale, or any other scale not intended to weigh powder. Clean your scale before each reloading session and calibrated it regularly. It should be zeroed before each session. Calibrate and zero it if is bumped, jarred, or whenever the accuracy is questionable.

Avoid Lead Exposure

Lead exposure is known to cause severe medical issues. Your body accumulates lead over time and is not efficient at filtering it back out. Most primers and bullets contain lead. It can also accumulate on your equipment and workspace. Good hygiene is a best practice to protect yourself from lead.

• Wash hands after handling ammunition materials and after shooting.
• Don t eat or drink while reloading.
• Don t touch your face.
• Ensure proper ventilation and avoid inhaling reloading room dust.
• Use a face mask when cleaning up and emptying cases.
• Avoid reloading in carpeted areas because carpet collects lead particles and results in potentially dangerous static electricity.

Use Manuals and Keep Records

Manuals and handbooks have already been mentioned for a good reason. They provide specific instructions for caliber recipes. It s essential to follow instructions to the letter. Leave experimentation to the professionals. Published data is FACT. If you are new to reloading, use only beginning to moderate loads until you gain experience with the cartridge, your firearm, and your loading equipment. You want to use current data because over time components change. Keep records of each lot that you reload and use starting loads before working up to the maximum in increments. Your records should include test results for each incremental step.

Keep the manual open to the cartridge type and size you are reloading for quick and easy reference during the process.

More Safety Procedures

By following the basics, you can expect to be safe and productive when reloading. But there is always more you can do for safety such as securely fastening equipment to your workbench, so a press doesn’t fall on your foot. And

• Keep reloading supplies and components out of the reach of children.
• Educate yourself before trying a load you don t have experience with.
• Create and follow a safety checklist for each load that you manufacture.
• Use a powder check system, either visual or manual, to make sure your bullets are not double charged or under-charged.
• Keep a fire extinguisher handy in the event of accidental ignition.
• Clean your reloading press and maintain it regularly.
• Clean up spilled powered immediately and don t reuse spilled powder.
• Don t force primers under any circumstance after beginning the reloading process.
• Think before doing anything that you haven t done before.
• Always make enough time to observe proper safety precautions.

Reloading is as Safe as You Make It

Safety is all about learning what to do, what NOT to do, and having the discipline to do it right.

Titan Reloading is dedicated to helping novice and veteran shooting enthusiasts safely and properly reload their own ammunition every time. If you follow these tips, you ll have a great experience while avoiding harm or malfunctions to yourself and equipment.

Titan Reloading wants to be part of your reloading experience. You will find a constantly updated stream of insights and tips from our blogs, “Help Videos”, and “FAQ”.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post September 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

BE A SHEEPDOG

Sheep are powerless to defend against the wolf. The sheep will fall prey to any attacks on the flock by wolves. A Sheepdog spends every day blending in with the flock. Unlike the sheep, the Sheepdog has all the same abilities that the wolf does. The only difference is the wolf intends to prey on the sheep and the Sheepdog intends to protect them. BE A SHEEPDOG! Wolves beware…..your game is over…..we’re packin’ too!

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

LEE BENCH PRIME PRESS KIT

NEW IN 2022. This kit includes everything found in the 50th Anniversary Kit but includes a Bench Prime instead of a Safety Prime.

Includes the new Breech Lock Challenger Press and one Breech Lock quick-change bushing.

You get a complete powder handling system, with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel. A $175.43 value.

Case Preparation Tools include a Value Quick Trim that allows you to trim the cases right on your press (order caliber specific trim dies separately) and a cutter and lock stud to trim your cases by hand (order caliber specific case length gauges separately). An included Lee chamfer tool chamfers the inside and outside of the case mouth and a tube of premium sizing lube is included. A small and large primer pocket-cleaning tool completes the case preparation package. $27.92 value.

But that’s not all! You get the popular Bench Prime and three of the most popular priming tool shell holders which work with over 60 different cartridges.. This kit is ideal for those who want the flexibility of priming on the bench top or off by mounting the tool to a piece of wood. $30.00 value.

Compare it to others priced at hundreds of dollars more. Reloading saves money and you save right from the start with Lee equipment.

LEE Breech Lock Challenger Press Product Review

Specifications:

Press Type: Single Stage

Frame Material: Die Cast Aluminum

Frame Design: O Frame

Frame Offset: 30 Degrees

Frame Opening Size: 4-1/4″

Handle Location: Bottom Right or Left

Die Size Accepted: Standard 7/8″-14 Threaded Dies

Die Bushing Accepted: Yes

Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings

Spent Primer Collection System: Yes

Ram Stroke: 3-1/2″”

Ram Diameter: .815″

Priming Feature: No

Number of Mounting Holes: 3

Mounting Hardware Included: No

Includes:

Challenger Breech Lock single stage press

1 Breech Lock Die Bushing

Lee Safety Scale

Perfect Powder Measure

Powder Funnel

Value Quick Trim

Lock Stud and Cutter

Lee chamfer tool

Primer Pocket Cleaner

Bench Prime

Tube of Sizing Lube.

Note:

A Lee Case Length Gauge, sold on the Case Length Gauge and Shellholder page, will need to be purchased for each caliber being reloaded.

A Lee Quick Trim Die, sold on the Quick Trim Case Trimmer page, will need to be purchased for each caliber being reloaded for the Value Quick Trim.

INSIGHT OF THE MONTH:

Build Your Personal Ammo Factory with Reloading Supplies

As a general rule, you should have several hundred or a couple of thousand rounds on hand or at least the reloading supplies for your most essential and most used calibers. You also want other reloading supplies that give you the flexibility to manufacture alternative rounds.

Here are the basics to get started:

1. Reloading Bench

You probably want to do some reading and research before getting started but when you’re ready to take action, the first two things you want in your reloading factory are a workbench and a trusted manual. Preferably a large sturdy workspace with plenty of storage. For details about creating your first workspace, check out the previous blog Workbench Ideas for Your Reloading Supplies. If you’re not going to build your own, any highly stable and strong commercially available workbench will work.

It does need to serve two primary purposes. First, a place to prepare cases and to operate your press. Second, a place to store reloading supplies, sorted brass, and finished ammo. You want to keep everything within arm’s reach but use special caution when storing primers and powder. The first thing that goes on your bench, in a dedicated space, and within arm’s reach is your trusted manual.

2. Reloading Press

Now, you are ready to start making decisions based on your experience, needs, and budget. You can select from a single stage press, turret press, or progressive press. Almost every experienced reloader recommends starting with a single stage. These presses hold one die at a time in a very rigid frame. Each pull of the lever completes one step of the process. Things to consider include automatic primer arm, small and large primer cups, adjustable for right- or left-hand use, and able to reload handgun and short rifle cases.

With a turret press, you rotate the dies manually and press the round through each step. It should hold four dies so that you can complete rounds without the time-consuming need to change dies. With each handle pull, the die plate rotates to the next station without needing to screw in a different die.

With a progressive press, a pull of the lever automatically completes every step for multiple rounds at the same time. This can be an excellent choice if you are shooting more than 500 rounds a week. Removable turrets allow for the change of calibers in seconds.

Unless you’re shooting precision bench rest competition, all the name-brand presses do mostly the same thing and in the same way. If you’re on a budget, it’s hard to beat the Lee Precision Breech Lock Challenger Kit.

3. Reloading Supplies -Dies, Components, and Case Prep

All reloading presses take removable dies. You select dies depending on the caliber you will be reloading. You will also need different dies depending on what step you’re at in the process. A die is what the brass and bullet are pressed into to form your finished ammo. Every caliber has its own die; a .357 die will not load a 9mm and vice versa.

The process is to take clean brass, resize it by pressing the brass into a resizing die, trimming the case length if needed, and then expand the neck of the case so a bullet will fit.

The next step is to insert a primer, charge the case with powder, seat the bullet, and press it in with a seating die. If your cartridge requires it, the case will need to be crimped.

Besides the mechanical equipment, your ammo factory needs reloading supplies. You’ll need brass, bullets, powder, and primers. Depending on the cartridge and the load, these components will vary. This is when you must refer to your reloading manual. Only use the reloading supplies and components designated for a specific load. Substituting powders, primers, and bullets can be disastrous. We don’t want you to injure yourself.

You’re going to need brass prep tools. If you are just getting started, you may want to go with new brass until you collect some used brass and/or if you don’t have the budget for prep tools. Unfired brass doesn’t usually need much work unless you’re doing precision shooting. Once you start reusing brass, it will be dirty and stretched out. Before putting in a fresh primer, powder, and bullet, the casings need to be cleaned and sometimes trimmed. Tools to get started include case trimmers, tumblers, and sonic cleaners.

Start with the ammo that you use the most. Over time, you’ll want to move up to faster presses and acquire the dies as well as other reloading supplies and tools that you need for every gun that you own.

Titan Reloading wants to be part of your reloading experience. You’ll find a constantly updated stream of insights and tips from our blogs, newsletters, help videos, and FAQs.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post August 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

HAPPY BIRTHDAY AMERICA!

The Titan Crew is wishing all of our fellow Americans an Independence Day full of family and reflection. Take a moment to consider the spirit of our Founding Documents and what is happening to our freedoms as we redefine the meanings. The strength of our country comes from the self reliant individuals who are a part of a larger cause, not in the notion of a collective society were those who do not pursue happiness are still entitled to it. Our Constitution guarantees our opportunities…not our outcomes. We must teach this spirit to our children lest they only hear the redefined versions of responsibility so popular in educational circles today.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

Lee Six Pack Pro

Available summer 2022

The culmination of nearly 40 years of progressive press design and production. Years of comments and suggestions have been incorporated into this new press.

Includes:  Six Pack Reloading Press, bin and bracket and universal case feed magazine.

Reloading dies, Shell plate, Auto Drum Powder Measure and rifle short or long charging dies sold separately. (Pro 6000 Kit s available)

Features:

Six stations allow any brand of die be used in line bullet feed dies, powder check dies and such.

Simple and reliable automatic indexing just one moving part, replaceable in seconds, no tools required and never requires adjustment.

Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.

Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm²  of solid support.

Spent primer tube collects dirty, gritty spent primers.

All dies securely fastened in the upper die carrier with the LEE Breech lock quick die change system. No more turret or tool head to replace or move during use.

Automatic priming system  simple, reliable and safe with any brand or size of primer. Primes at the bottom of stroke so all six stations are available for operations.

Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port.

Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.

Cartridge changeover in seconds, including primer size with no adjustments.

Automatic case ejector reliably whisks away your completed round to the ammo bin. Press includes combination tool rack, bin bracket, along with free ammo bin.

Product information:

INSIGHT OF THE MONTH:

How to Properly Reload a Cartridge

The fundamental steps for reloading a cartridge can be reduced to a few basic operations. Additional operations and reloading supplies will be required in some situations or omitted in others.
1. Inspect and clean cases. Clean dirt and grime from each case before inspecting for deformities and splits. A sonic cleaner is good for removing carbon buildup and oxidization. To clean and polish brass, use a tumbler.
2. Deprime the brass. Use a dedicated decapping die to punch the old primer out of the casing bottom, or (more common) the die that resizes your brass will also knock the old primer out.
3. Lubricate cases to prevent them from getting stuck in the sizing die.
4. Resize the brass. A resizing die is used to bring the brass back into the correct exterior dimensions.
5. Trim the case to specified length if needed. Fired brass can lengthen beyond safe limits. Use calipers or a case gauge to check the length. Trim as required.
6. Clean the primer pocket as required.
7. Prime with correct primer size and manufacturer according to the reloading manual.
8. Weigh and load the correct powder charge with a powder funnel. Double-check your reloading manual for data on powder type and proper load for your bullet weight and cartridge.
9. Select proper die and adjust for proper seating depth. See your manual for proper settings.
10. Review your setup.
11. Run preliminary test rounds and examine each step for correct results.
12. Complete a batch with periodic checks for accuracy.

Getting Started with Reloading Supplies Reloading kits are great for beginners getting into this fun and rewarding hobby. The cornerstone of a reloader’s workbench is the press. It enables you to almost effortlessly complete functions with a pull of the handle. Different kits include different tools. The main press styles are single stage, turret, and progressive. Your shooting preferences and the amount of ammo you want to load help determine the most suitable press and other reloading supplies for you. Titan Reloading is dedicated to helping novice and veteran shooting enthusiasts safely and properly reload their own ammunition every time.

Titan Reloading is a Master Distributor of Reloading Supplies & Equipment online. Choose from Lee Precision, Dillon, Hornady, Redding, Mec, & Lyman. For more information and/or to peruse and shop our online store please visit www.TitanReloading.com or contact Titan Reloading at 262.397.8819 with any questions.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post July 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

Yeah Buddy…..it’s May…..OOHRAH!! Time to get out the grill, the golf clubs, the guns and…well…the lawn mower. I don’t know about you but I LOVE this time of year.

The Titan Crew wants to THANK YOU for the kind words on the forums out there. Many people have found us because you, our customers, have shared the experiences you’ve had with us. Again Thanks!

Another way that that you all can help fellow customers is by writing product reviews on our website. We encourage this because your testimonies really do carry the most weight.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

Lee Quick Trim Case Trimmer

This is a new case trimming system from Lee Precision. No calipers, measurements or adjustments are required. Simply install the appropriate quick trim die in your press and start trimming using either the Deluxe Quick Trim or the Value Quick Trim cutters. A click adjustable stop allows trim length adjustment in .001 of an inch increments. This allows the user to shorten cases to a uniform shorter length than standard, reducing trimming frequency. With this new system you can also trim calibers like .17 Rem and .204 Ruger to exact case lengths.

INSIGHT OF THE MONTH:

Advanced Reloading Supplies for Performance and Satisfaction

Choices come down to what you want from your reloading supplies or what you are willing to accept from factory cartridges. It only takes a basic understanding and a little practice to be quickly rewarded with superior and cost-effective ammo. From there, it becomes about incrementally optimizing your ammo’s performance. Hand selecting your reloading supplies and equipment lets you fine-tune your ammunition to your own needs. You can optimize for more ange, better accuracy, and more power from every round.Hence, so many highly experienced shooters insist on using their customized ammo as often as possible.

Being familiar with the four basic components of reloading supplies(case, primer, propellant, and projectile) is merely the first step to the fascinating and time-honored tradition of self-loading. Each component has multiple variations that can be combined in assorted ways with numerous variations of each of the other components.

You can develop the right cartridge that allows your firearm to deliver the performance that you want and need. Reloading supplies and equipment become essential for users of obsolete cartridges and non-standard or wildcat cartridges. Obsolete isn’t always a historically old cartridge. Rounds like the Winchester Super Short Magnum were only manufactured for a short amount of time. Fortunately, few cartridges have totally unique case dimensions. Most centerfire cartridges were created from a parent case and can be formed using an existing case. Dimensions are known, so die manufacturers can make them. With most bullet diameters being more or less standard, your ability to reload obscure cartridges across a wide spectrum is better than ever.

With accuracy being the primary goal of most enthusiasts, the best combination of bullet performance and velocity, experimentation for that single perfect round is endless. Improvements in accuracy are usually incremental and rarely exponential. For hunters, weather and other environmental factors require developing specific rounds for specific situations. Even target shooting under controlled conditions requires different rounds for varying distances with each firearm used.

As you begin your experimentation with different reloading supplies and equipment, you need to first hone the basic procedures. As you become a more precise reloader, you’ll need to decide where you want to begin making changes. This becomes a lifelong hobby as you make one change at a time, and adjusting accordingly. You likely begin by trimming cases to consistent and proper length. And then step up to weighing your cases and bullets because manufacturing tolerances vary. In time, you begin weighing each powder charge down to the last kernel but only after trying several different powder shapes. What comes next? You might ask? Do you clean your primer pockets? Have you tried neck-sizing only, and competition dies?

If you want rounds that are better than store-bought, you’ll need to put in some work.

Titan Reloading is dedicated to helping novice and veteran shooting enthusiasts safely and properly reload their own ammunition every time.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post May 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

Memorial Day has come and gone but we want to THANK ALL of our military veterans, past and present, for the sacrifices made to uphold the freedoms we enjoy every day. THANK YOU.

Robin, the Titan Crew and I are all doing well. Summer and all that goes with it is finally here and the only problem I can see is finding enough time to do everything as much as I’d like to. I have all summer to ‘get ‘er done’ so……ALL IS GOOD. I hope life is the same with you.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

LEE VALUE TURRET PRESS KIT

4 Hole Turret w/ Auto Index

The rugged Turret Press along with the Auto Drum Powder Measure, produce top quality pistol ammo in a hurry. A finished round with a few pulls of the lever. Large enough to handle monster belted magnum rifle cases. When it is time to change calibers, simply lock in a new turret and begin loading within seconds. In addition to the Turret Press and Auto Disk Powder Measure; the kit includes the Lee Safety Scale, unmatched for sensitivity, a primer pocket cleaner, cutter and lockstud to trim the cases and a chamfer tool to deburr cases after trimming.

A set of Lee Dies is all that is required to complete this reloading outfit. All this at a price that will allow you to pay for your investment in a matter of hours.

This press is ideal for handgun loading and with experienced hands, you can load over 200 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time.

The fourth hole was added to accommodate the use of the Lee Factory Crimp die which is an optional die but comes with the new Lee Deluxe Pistol Die sets.

To prime your cases on the press you need the Lee Safety Prime ( sold separately ).

NOTE: The Bench Plate System shown in the picture is NOT included in this Turret Press Kit.

Specifications:

Press Type: Turret Press

Frame Material: Steel and Die Cast Aluminum

Handle Location: Bottom Right or Left

Die Size Accepted: 7/8″-14 Threaded Dies

Spent Primer Collection System: Built-in

Ram Stroke: 3-1/2″

Priming Feature: Ram Prime unit with large and small primer cups

Number of Mounting Holes: 3

Mounting Hardware Included: no

Includes:

Turret Press with Auto Index

Large and Small Primer Levers (LPS)

Auto Drum Powder Measure

Safety Scale

Primer Pocket Cleaner

Cutter and Lock Stud

Chamfer Tool

INSIGHT OF THE MONTH:

Is Reloading a Safe Hobby?

Many beginning shooters use nothing but factory rounds. At least until better precision and lower costs become a concern. That can be years down the road or in a mere few months. Eventually, these beginners make friends and acquaintances with guys having many more years of experience and know the ins and outs of reloading supplies and ammo. That’s a good thing about our hobby and Titan Reloading also wants to help you shorten the learning curve.

Be as Precise About Reloading as You are with Your Shooting

At Titan Reloading, we highly encourage everyone to practice precision reloading. Just like it takes time on the practice range, it takes time to learn about reloading supplies and the process. Life is not without risks and mistakes can happen when loading ammunition whether the mistake happens at a factory or in your garage.

Inspect your casings.

The two things you are most likely to come across are dents and micro-cracking. Neither should be reused. Dents can happen during the reloading process if too much compression is applied which sometimes leads to outer casing dents. Look for cracking everywhere but particularly around the base of the rim where they might appear as a bright ring. Dents and cracking don’t often occur unless a case has previously been improperly reloaded.

Primers not properly seated.

The primer is properly seated when it sits down inside the primer pocket of the casing. Inspect the bottom of the rim or case to verify the primer is not protruding. If the seating is not correct, remove it and reseat it or use a small flat tool to gently nudge it into the pocket.

Be precise with your powder loads.

With a single stage press, load powder into all the cases in the tray before moving on to seating bullets. Before pressing the bullets, examine the powder loads in the case with a flashlight. What you are primarily looking for is that you did not mistakenly double load any of the casings. With a progressive press, you can use a powder level check system to prevent over or excessive powder loading.

Press the bullets to the right depth.

Before crimping, examine your work to be sure all bullets have been pressed to the correct depth. If the bullet is too deep, it might be that you don’t have enough powder in the case. Too shallow indicates too much powder. Neither is desirable and neither matches the manual specs.

Here are a few testimonials from experienced shooters:

• Dave H. I count myself among the many shooters I know that reload for cost savings. I keep a healthy amount of reloading supplies on hand for both hunting rifles and handgun target practice. I have a couple of expert reloader friends that taught me how to do it right when I was getting started. After 12 years, I have no complaints and have only experienced the rarest of dud rounds. While other buddies are having a tough time finding the factory ammo they need, the reloading supplies that I have on hand continue to fill the bill with big savings.
• Duke T. For economic reasons, I first started using reloaded rounds that I bought from a couple of different small businesses. I got decent results but couldn’t always get exactly what I wanted or had to wait a long time for custom loads. About six years ago, I bit the bullet (so to speak) by investing in the reloading supplies and equipment I need to do it myself and have never looked back. Not only do I get the cost savings, but it enables me to tailor my loads to my specific needs. I’m a bit fussy. Not only do I customize rounds for specific purposes, but I also fine-tune for things like the time of the year and how weather affects performance. Self-loading is the only way I’ve found to account for all the variables.
• Bill W. I have hand loaded at least 12,000 rounds of 9mm and 380 – NEVER HAD A PROBLEM.
• Frank B. In almost 43 years of loading my own, I’ve only had one fail to fire during a match. I set that round aside to look at closely later. I found the primer had gotten into the pocket upside down. I redoubled my diligence when installing primers and never expect to have it happen again.

Put Trust in Yourself

If you can use power tools, you can reload your own ammo. With reloading supplies, you need to educate yourself, exercise caution, and check your work as you go. By doing your research before getting started, reloading ammo becomes a fun and safe hobby.

Titan Reloading is dedicated to helping novice and veteran shooting enthusiasts safely and properly reload their own ammunition.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post June 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

WOW!! It’s been 10 YEARS already! On April 1st 2012 I retired from my 30 year engineering career to work full time on Titan Reloading. This has been one of the best decisions I’ve made in my life. Many things have happened in 10 years but my desire to provide reloaders with the products they need remains the same. Thank you for your interest in Titan Reloading. WE AIM TO PLEASE!

Harley-Davidson motorcycles were invented right here in Milwaukee Wisconsin and it seems like as soon as the “Rockin’ Robins” come back they bring the rumblin’ of summer as well. I can tell by listening to the birds in the morning however that waiting for spring won’t be too much longer…..all is GOOD!

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

Lee Safety Prime Small and Large Primer Feeder

Now Includes the new Folding Primer Tray

Makes priming on the press a delight. Never touch the primers from box to shell. Primer flip tray features a CAD designed flipping surface that instantly rights the primers. Change primer size in seconds. Primers are dispensed with a satisfying click of the primer feed trigger. Use any brand of primers because the priming operation is remote from the feeder. Works on all presses 2006 and later that have the Lever Prime System (LPS).

Lee Safety Prime is a new priming system for both small and large primers, never touch the primers from box to shell.  Used with 2006 and newer Breech Lock Challenger Presses, Turret Presses, the Classic Cast Turret Press and the Classic Cast Press.

NOTE: Lee Auto-Disk Powder Measure Riser (sold separately) is required for installation of this Safety Prime on all Turret Presses.

Material: Plastic

INSIGHT OF THE MONTH:

Is Reloading a Safe Hobby?

Many beginning shooters use nothing but factory rounds. At least until better precision and lower costs become a concern. That can be years down the road or in a mere few months. Eventually, these beginners make friends and acquaintances with guys having many more years of experience and know the ins and outs of reloading supplies and ammo. That’s a good thing about our hobby and Titan Reloading also wants to help you shorten the learning curve.

Be as Precise About Reloading as You are with Your Shooting

At Titan Reloading, we highly encourage everyone to practice precision reloading. Just like it takes time on the practice range, it takes time to learn about reloading supplies and the process. Life is not without risks and mistakes can happen when loading ammunition whether the mistake happens at a factory or in your garage.

Inspect your casings.

The two things you are most likely to come across are dents and micro-cracking. Neither should be reused. Dents can happen during the reloading process if too much compression is applied which sometimes leads to outer casing dents. Look for cracking everywhere but particularly around the base of the rim where they might appear as a bright ring and around the case mouth. Dents and cracking don’t often occur unless a case has previously been improperly reloaded.

Primers not properly seated.

The primer is properly seated when it sits down inside the primer pocket of the casing. Inspect the bottom of the rim or case to verify the primer is not protruding. If the seating is not correct, remove it and re-seat it or use a small flat tool to gently nudge it into the pocket.

Be precise with your powder loads.

With a single stage press, load powder into all the cases in the tray before moving on to seating bullets. Before pressing the bullets, examine the powder loads in the case with a flashlight. What you are primarily looking for is that you did not mistakenly double load any of the casings. With some progressive presses, you can use a powder level check system to prevent over or excessive powder loading. You need to look into every case as they leave the powder station to verify proper powder drops on presses that cannot use a powder check system.

Press the bullets to the right depth.

Before crimping, examine your work to be sure all bullets have been pressed to the correct depth. If the bullet is too deep, it will increase the chamber pressure which could become dangerous. Too shallow indicates too much powder. Neither is desirable and neither matches the manual specs.

Here are a few testimonials from experienced shooters:

• Dave H. I count myself among the many shooters I know that reload for cost savings. I keep a healthy amount of reloading supplies on hand for both hunting rifles and handgun target practice. I have a couple of expert reloader friends that taught me how to do it right when I was getting started. After 12 years, I have no complaints and have only experienced the rarest of dud rounds. While other buddies are having a tough time finding the factory ammo they need, the reloading supplies that I have on hand continue to fill the bill with big savings.
• Duke T. For economic reasons, I first started using reloaded rounds that I bought from a couple of different small businesses. I got decent results but couldn’t always get exactly what I wanted or had to wait a long time for custom loads. About six years ago, I bit the bullet (so to speak) by investing in the reloading supplies and equipment I need to do it myself and have never looked back. Not only do I get the cost savings, but it enables me to tailor my loads to my specific needs. I’m a bit fussy. Not only do I customize rounds for specific purposes, but I also fine-tune for things like the time of the year and how weather affects performance. Self-loading is the only way I’ve found to account for all the variables.
• Bill W. I have hand loaded at least 12,000 rounds of 9mm and 380 – NEVER HAD A PROBLEM.
• Frank B. In almost 43 years of loading my own, I’ve only had one fail to fire during a match. I set that round aside to look at closely later. I found the primer had gotten into the pocket upside down. I redoubled my diligence when installing primers and never expect to have it happen again.

Put Trust in Yourself

If you can use power tools, you can reload your own ammo. With reloading supplies, you need to educate yourself, exercise caution, and check your work as you go. By doing your research before getting started, reloading ammo becomes a fun and safe hobby.

Titan Reloading is dedicated to helping novice and veteran shooting enthusiasts safely and properly reload their own ammunition. Titan Reloading wants to be part of your reloading experience. You’ll find a constantly updated stream of insights and tips from our blogs, newsletters, help videos, and FAQs.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

The post April 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

I am soooo looking forward to spring and all that it brings. It’s been a somewhat mild winter but enough already. The birds have been a lot louder around here in the morning lately, but I can’t tell if they’re complaining ( like me ) or just happy to be this close. Either way, I like it. I’m hoping MLB can resolve their issues so all the boys can report for spring training and get the bats crackin’ again, then all will good!

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

FEATURED PRODUCT:

LEE BENCH PRIME PRESS KIT

NEW IN 2022. This kit includes everything found in the 50th Anniversary Kit but includes a Bench Prime instead of a Safety Prime.

Includes the Breech Lock Challenger Press and one Breech Lock quick-change bushing.

You get a complete powder handling system, with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel. A $175.43 value.

Case Preparation Tools include a Value Quick Trim that allows you to trim the cases right on your press (order caliber specific trim dies separately) and a cutter and lock stud to trim your cases by hand (order caliber specific case length gauges separately). An included Lee chamfer tool chamfers the inside and outside of the case mouth and a tube of premium sizing lube is included. A small and large primer pocket-cleaning tool completes the case preparation package. $27.92 value.

But that’s not all! You get the popular Bench Prime and three of the most popular priming tool shell holders which work with over 60 different cartridges.. This kit is ideal for those who want the flexibility of priming on the benchtop or off by mounting the tool to a piece of wood. $30.00 value.

Compare it to others priced at hundreds of dollars more. Reloading saves money and you save right from the start with Lee equipment.

Specifications:

Press Type: Single Stage

Frame Material: Die Cast Aluminum

Frame Design: O Frame

Frame Offset: 30 Degrees

Frame Opening Size: 4-1/4″

Handle Location: Bottom Right or Left

Die Size Accepted: Standard 7/8″-14 Threaded Dies

Die Bushing Accepted: Yes

Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings

Spent Primer Collection System: Yes

Ram Stroke: 3-1/2″”

Ram Diameter: .815″

Priming Feature: No

Number of Mounting Holes: 3

Mounting Hardware Included: No

Includes:

Challenger Breech Lock single stage press

1 Breech Lock Die Bushing

Lee Safety Scale

Perfect Powder Measure

Powder Funnel

Value Quick Trim

Lock Stud and Cutter

Lee chamfer tool

Primer Pocket Cleaner

Bench Prime

Tube of Sizing Lube.

Note:

A Lee Case Length Gauge, sold on the Case Length Gauge and Shell Holder page, will need to be purchased for each caliber being reloaded.

A Lee Quick Trim Die, sold on the Quick Trim Case Trimmer page, will need to be purchased for each caliber being reloaded for the Value Quick Trim.

INSIGHT OF THE MONTH:

Back to the Future with Reloading

This is an article from our Titan Reloading Blog that I think is an interesting read for all reloaders. Hope you enjoy.

Do you know what were some of the most common items found in both frontier trading posts and general stores? Not surprisingly, the answer is ammo reloading supplies! Basic components like black powder, flash powder or caps, bullet molds, patches/wadding, lubricant, and other necessities for reloading and maintaining guns.Often, people even manufactured some of these reloading supplies themselves to save money and to be more self-sufficient.

Our forefathers began arriving in North America in the 15th century with more advanced weapons (for that time) and large stores of reloading supplies. The German-made Blunderbuss, an early version of the shotgun, was a favorite among early colonists. It featured a flared muzzle and a broad opening for fast and easy loading. Another common weapon was the Matchlock Musket, which used a match – in the form of a small burning rope to ignite gunpowder through a small hole in the gun’s loaded barrel. American firearms and have come a long way since those times.

Pioneering the American Wilderness

The American tradition of making your own ammunition dates back to the Revolutionary War, and before. In 1776, a crowd of New Yorkers and a group of soldiers lead by General Washington tore down a lead statue of King George II and sent it to be melted into musket balls. In need of reloading supplies, soldiers often melted lead into slugs with hand clamp molds. Pioneers were also hand-pressing bullets at cabin firesides.

From the time of the earliest pioneers, gunsmiths were vital members of small settlements. It was these pioneering and skilled gunsmiths who developed the American long rifle that became known as the Kentucky, Ohio, or Pennsylvania rifle. Of course, the most important feature was the extended barrel with twisting grooves that guided whatever was used as a bullet to spin as it exited the barrel, ensuring a straighter shot and better aim. These rifles were so prized that they were often elaborately carved and decorated with finely etched brass or silver plates.

Without skilled gunsmiths and trading posts for reloading supplies, bringing civilization to the American wilderness would have certainly taken much longer and been much more difficult. In some ways, it’s comparable with the modern reloader’s back to the future solution to get around the national ammo shortage since the pandemic began.

Many other advances in gun technology and reloading supplies occurred between the Civil War and the early 20th century. The Spencer Repeating Rifle Company patented a design at the start of the Civil War capable of repeated firing from a single ammunition load (a favorite of President Abraham Lincoln). Innovations also included rear-loading and breech loading systems from Sharps, Maynard, and Burnside.

Today, the availability of different caliber and bullet types has increased exponentially with a matching availability of reloading supplies. The next time you are ready to place an order, take a moment to appreciate the history of ammunition and the advancements in gun technology along the way.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

The post March 2022 appeared first on Titan Reloading.

RELOAD WITH CONFIDENCE!
What’s Your TITAN Advantage?….WE RELOAD!
***Your Reloading Specialists***

The Titan Crew is “Steady as she goes” right now and looking forward to the Super Bowl. Our “Green and Gold” was knocked out early but the playoffs have been great this year. The days are growing steadily longer so we are on the right side of winter and soon, “Play Ball !” will be heard across this land. As for that groundhog this Wednesday I recommend he go fly a kite, ’cause lookin’ up will fix his shadow seeing problem.

We are truly enjoying all the friends we have made through Titan Reloading and look forward to many more. Feel free to contact us. When possible, please email us rather than call. Due to our limited phone system and staff we are able to respond to your questions quicker via email. Please include your full name or order ID number with any order inquiries. Service and Support is our top priority. As always, you will find many answers to questions in the “FAQ” and “Help Videos” areas of our website www.titanreloading.com . Check us out on YouTube .

Dennis / Titan Reloading

LEE SALE
CLICK HERE FOR DETAILS

HORNADY SALE
CLICK HERE FOR DETAILS

FEATURED PRODUCT:

Classic Cast Turret Press Kit

This kit and a set of Lee dies is everything you need to begin reloading. The Classic Cast Turret features solid steel linkage and a cast iron base.The Classic Cast Turret is fast and convenient when loading handgun cartridges, with rates in excess of 250 rounds per hour possible.

The kit includes the Auto Drum powder measure and riser, perfect for all handgun and small rifle cartridges. Large and Small Safety Prime are included making on press priming an ease. Instant change 4 hole turrets make changing calibers a snap. Deactivate the auto-index and batch load the longest and largest rifle cartridges.

Complementing your press kit are the case conditioning tools to prepare your brass for loading. Includes Cutter, Lock Stud, Chamfer Tool, small and large Primer Pocket Cleaner, and a tube of Lee case sizing lube.

Complete your setup with a cartridge specific Case Length Gauge (sold separately). Verify your loads with the included Lee Safety powder scale. Completing the kit is Modern Reloading Second Edition, recently revised with all new load data covering 167 cartridges with over 28,000 loads.

NOTE: The bench plate mounting system shown in the picture is sold separately in the “Press Accessories” category.

INSIGHT OF THE MONTH:

Turret Press Indexing Explained

The square ratchet is both free to rotate inside the clamp and held fast by the clamp, depending on which direction the ram is moving.  If you are lowering the press lever (raising the ram) you don’t want the turret to rotate, so the square ratchet must be free to rotate inside the clamp.  The friction between the square ratchet and the index rod causes the square ratchet to slide down to the bottom of the cavity inside the clamp, where it is free to rotate when it passes over the twist in the index rod.  On the upswing of the press lever (as the ram goes down) the drag between the square ratchet and index rod causes the square ratchet to slide up to the top of the cavity inside the clamp, where the square ratchet fits into matching notches in the clamp which prevent the square ratchet from turning, so as it passes the twist in the index rod it turns the turret.

Included with the Deluxe and Classic Turret Presses is a spare black nylon ratchet. This installs inside the black auto index clamp on the steel ram. The square black ratchet rides on the 1/4″x 1/4″ steel index rod. When removing the aluminum turret, be sure to raise the ram to disengage the square ratchet from the twisted part of the rod.

The nylon square ratchet that comes with the turret press is designed to properly index the press for 10s of thousands of rounds; however, an extra does comes with the press. This inexpensive part is made of nylon for two reasons with the first being that if the index rod is operated against the proper rotation, the nylon will fail before any damage occurs to any other part. The second is that they are inexpensive to produce and purchase.

The ratchet enables the indexing without “tweaking” or adjustment. The index rod may be removed and replaced at will without affecting the timing of the press. In the unlikely event that your press was received and not indexing correctly, the ratchet is not the reason and the issue is easily resolved by turret press index alignment.

The only reason the ratchet would be damaged is from forcing the index rod against that ratchet. This generally occurs when turrets are removed with the ram at the bottom of the stroke as the ratchet is engaged during the down stroke. When removing turrets, it is necessary to raise the ram about an inch or so.

A problem can ultimately affect indexing if the ratchet is excessively forced against the index rod, because the top portion of the ram, designed to rotate for another reason, would do so under these circumstances. Then, even with the ratchet replaced, the entire housing is off center. The proper alignment of the housing is completed by using the lever portion of the priming arm and aligning it with the two bumps on the base of the press

The nylon housing that holds the ratchet never needs to be opened other than to eventually replace the nylon ratchet. Remove the index rod, then the housing by removing the horizontal screw. Replace the ratchet remembering to place the flange in the downward position and reattach the nylon housing. This housing does nothing more than contain the ratchet. Do not over tighten the screw because the threads can be stripped.

Titan Reloading   994 W. Sumner St., Hartford, WI 53027    1-262-397-8819

WE’RE SETTING THE STANDARD, ONE CUSTOMER AT A TIME.

You are receiving our monthly Titan Reloading Newsletter because you subscribed to it when you set up your account on our website www.titanreloading.com. We don’t want you to miss out on the newsletters we send you. We also respect all our valued customers consent. That is why we are asking all of our readers to decide if they would like to discontinue receiving newsletters from Titan Reloading. If you’d like to stop receiving our newsletters please click the “unsubscribe” link at the bottom of the newsletter.

The post February 2022 appeared first on Titan Reloading.