Lee 6 Cavity Bullet Mold produces a .490 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD 490 BALL appeared first on Titan Reloading.

Lee double Cavity Bullet Mold produces a .600 diameter Ball that weighs 325 grains .  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 600 BALL appeared first on Titan Reloading.

Lee Single Cavity Mold produces a .690 diameter Ball.

Lee Single Cavity Bullet Mold produces a .690 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE SC MOLD 690 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .562 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 562 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .575 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 575 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .535 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 535 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .495 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 495 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .500 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 500 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .454 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 454 BALL appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold produces a .457 diameter Ball.  Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 457 BALL appeared first on Titan Reloading.