Lee 6 Cavity Bullet Block 452-200-RF produces a .452 diameter 200 grain Round nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD 452-200-RF appeared first on Titan Reloading.

Lee Double Cavity bullet Mold 452-160-RF produces a .452 diameter 160 grain round nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 452-160-RF appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold TL452-200SWC produces a .452 diameter 200 grain Semi Wad Cutter nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

Customer’s Report: Excellent Accuracy!

The post LEE DC MOLD TL452-200SWC appeared first on Titan Reloading.

Lee 6 Cavity Bullet Block TL452-200SWC produces a .452 diameter 200 grain Semi Wad Cutter nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

Customer’s Report: Excellent Accuracy!

The post LEE 6 CAV MOLD TL452-200SWC appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold 452-255-RF produces a .452 diameter 255 grain round nose bullet suitable for cartridges like 45ACP, 45 Colt, etc.

Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 452-255-RF appeared first on Titan Reloading.

Lee 6 cavity block produces a .452 diameter 230 grain round nose bullet suitable for cartridges like 45 ACP, 45 Colt etc.  Designed for volume production Lee 6-Cavity Bullet mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD TL452-230-2R appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold 452-228-1R produces a .452 diameter 228 grain Round nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 452-228-1R appeared first on Titan Reloading.

Lee 6 Cavity Bullet Block 452-228 1R produces a .452 diameter 228 grain round nose bullet suitable for cartridges like 45 ACP, 45 Colt etc.

Made for heavy duty volume production. The mold and blocks are  machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. The handle attached to the sprue plate is included.

NOTE: Handles to open and close this mold sold separately.  item 90005

The post LEE 6 CAV MOLD 452-228 1R appeared first on Titan Reloading.

Lee Double Cavity Bullet Mold 452-252 SWC produces a .452 diameter 252 grain Semi Wad Cutter nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD 452-252 SWC appeared first on Titan Reloading.

Lee Double Cavity Mold produces a .452 diameter 230 grain round nose bullet suitable for cartridges like 45ACP, 45 Colt, etc.  Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts.  In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates.

The post LEE DC MOLD TL452-230-2R appeared first on Titan Reloading.