Lee 50 BMG Large series (1 1/4×12 thread) 3-die set, used with the Classic Cast Press only. Includes Full Length Sizing Die, Bullet Seating Die (no crimp), Factory Crimp Die and instructions with reloading data. Select this die set if you are reloading mixed range brass.

Note:  If you are using a competitor’s press with removable bushing, consider our 1 1/2-12 to 1 1/4-12 die adapter bushing. This bushing will allow you to install these dies into your press.

50 BMG shell holder sold separately.

The post LEE 50 BMG LARGE SERIES 3 DIE SET appeared first on Titan Reloading.

Lee Large series (1 1/4×12 thread) Collet 2 Die Set for 50 BMG, used with the Classic Cast Press only. Includes Collet Sizing Die, Bullet Seating Die and Instructions. Does not include shell holder or powder dipper.

The post LEE 50 BMG COLLET DIE SET appeared first on Titan Reloading.

Lee Large series (1 1/4×12 thread) Collet 2 Die Set for .338 Lapua, used with the Classic Cast Press only. Includes Collet Sizing Die, Bullet Seating Die and Instructions. Does not include shell holder or powder dipper.

The post LEE .338 LAPUA COLLET DIE SET appeared first on Titan Reloading.

This steel 3-die set includes a sizer die with decapping unit, a powder through expanding die and a bullet seater and roll crimp die, adjustable from slight taper to full roll. The 1 1/4″-12 thread will fit the Lee Classic Cast Press ONLY. Does not include load data and powder dipper.

Included:

Sizer Die (with “unbreakable” decapping unit)

Bullet Seater and Roll Crimp Die

Powder through Expanding Die

Shellholder

NOTE: No Load Data or powder dipper

The post LEE .577 SNIDER 3 DIE STEEL appeared first on Titan Reloading.

This steel 3-die set includes a sizer die with decapping unit, a powder through expanding die and a bullet seater and roll crimp die, adjustable from slight taper to full roll. The 1 1/4″-12 thread will fit the Lee Classic Cast Press ONLY. Does not include load data or powder dipper.

Included:

Sizer Die with “unbreakable” decapping unit

Bullet Seater and Roll Crimp Die

Powder through Expanding Die

Shellholder

NOTE: No Load Data or powder dipper

The post LEE .577/.450 MARTINI-HENRY 3 DIE SET STEEL appeared first on Titan Reloading.

Lee Large series (1 1/4×12 thread) 2-die set for 50 BMG, used with the Classic Cast Press only. Includes Full Length Sizing Die, Bullet Seating Die and Instructions. Does not include shell holder or powder dipper.

The post LEE 50 BMG LARGE SERIES 2 DIE SET appeared first on Titan Reloading.

This 2 Die Set is constructed of steel and includes a sizer die with decapping unit and a bullet seater die, adjustable from slight taper to full roll. Does not include a shellholder. The 1 1/4″-12 thread will fit the Lee Classic Cast Press ONLY. Load data, shell holder and powder dipper not included.

Included:

Sizer Die with “unbreakable” decapping unit

Bullet Seater Die

NOTE: No Load Data, shell holder or powder dipper

The post LEE .416 BARRETT 2 DIE SET STEEL appeared first on Titan Reloading.